Soviet Watch Pobeda 2603 16 Jewels Leningrad Electric Clocks (ECHL) Made in USSR 1950s
Be the first to reviewSKU: SWP015
1 / 12Vintage Soviet Pobeda Wristwatch — ÉChL Assembly (Late 1950s)
A rare and highly collectible Soviet-era Pobeda wristwatch assembled at the Electric Clocks of Leningrad factory (ЭЧЛ) in the late 1950s. ÉChL-assembled Pobeda watches were produced in smaller numbers than mass-factory versions, making them especially sought after by collectors. The watch is powered by the reliable Caliber 2603 movement (16 jewels) produced by the Petrodvorets Watch Factory (ПЧЗ). It has been fully serviced on September 15, 2025 by a professional watchmaker (complete disassembly, cleaning, washing, and lubrication). After servicing, the movement has been carefully tested and shows accurate timekeeping.
Condition & Appearance
The dial has a cream-colored guilloché (structural textured) surface with applied gilt Arabic numerals and a small seconds subdial at 6 o’clock. Original gilt hands, including the sub-seconds hand, are intact. The chrome-plated case shows authentic vintage wear — light scuffs and scratches that confirm originality and add charm. The watch is sold with a brown vintage-style faux-leather strap.
Technical Specifications
- Movement: Caliber 2603 (ПЧЗ / Petrodvorets Watch Factory)
- Jewels: 16
- Movement diameter: 26 mm
- Movement height: 3.9 mm
- Power reserve: ~30 hours
- Balance frequency: 18,000 vph
- Balance: U3076
- Hands size: 1.60 × 0.88 / 0.16 mm
- Seconds: Small subdial at 6
- Case size: 33 × 41 mm
- Thickness (with crystal): 9 mm
- Lug width: 16 mm
Why Collectors Value ÉChL Pobeda
- Rarity: Produced in smaller quantities compared to mass-assembled Pobeda watches.
- Historical significance: Assembled at the Electric Clocks of Leningrad factory, an unusual origin for Pobeda production.
- Distinctive design: Cream guilloché dial with applied gilt numerals, enhancing both elegance and collectability.
Special Notes
These Pobeda wristwatches from the late 1950s, assembled at ЭЧЛ, are considered rare production examples compared to mass-assembled Pobeda models. Timepieces with the ÉChL marking are highly valued among collectors due to their historical significance, lower production numbers, and distinctive assembly origin. The elegant cream guilloché dial with applied gilt numerals further enhances its collectible appeal. The watch shows signs of age, but thanks to the recent professional servicing and accuracy check, it is in excellent working condition. Its imperfections add to the authentic vintage charm and confirm its originality, making it not only a functional wristwatch but also a valuable collectible.
Overview
- Period
- 1950s
- Factory
- Petrodvorets Watch Factory
Movement
- Movement
- Mechanical (hand-wound)
- Caliber
- 2603
- Jewels
- 16 jewels
Case size
- Diameter (Ø)
- 33 mm
- Weight
- 100 g
Case
- Case material
- Chrome-plated
- Case finish
- Chrome-plated
Condition & service
Condition: Fully serviced
Carefully packed and sent with tracking — typically 7–21 business days depending on destination.
Every watch is a genuine Soviet-era original, inspected and (where noted) serviced before it ships.
If it isn't right, return it within 14 days for a refund — just get in touch and we'll sort it out.
A Soviet mechanical watch has no battery — it runs on a tiny wound spring, just as it did decades ago. Treat it kindly and it will keep good time for many years. Here is how to wind, set and care for yours.
Winding a hand-wound watch
- Wind it off your wrist. Hold the watch in one hand so you do not put sideways stress on the winding stem.
- Turn the crown clockwise (away from you) with your thumb and forefinger, in smooth, steady turns.
- Stop as soon as you feel firm resistance. Do not force that last turn — a fully wound spring stops abruptly, and pushing past it can damage the mainspring.
- A full wind lasts roughly 24–40 hours. Winding once a day, at about the same time, keeps the watch running and accurate.
Automatic (self-winding) models
Some Soviet watches — certain Vostok and Slava models — wind themselves from the motion of your wrist. If one has stopped, give the crown 20–30 gentle turns to get it started, then simply wear it. You cannot over-wind a healthy automatic.
Setting the time & date
- Gently pull the crown out to the setting position and turn it to move the hands. Setting the time forwards (clockwise) is kindest to the movement.
- If your watch has a date, avoid changing it between roughly 9 p.m. and 3 a.m. The date mechanism is engaged during those hours and forcing it can break it — move the hands to mid-morning first, then set the date.
- Push the crown fully back in when you are finished.
Everyday care
- Keep it dry. Vintage watches are not water resistant, even if marked so decades ago. Take it off before washing your hands, swimming or showering.
- Avoid magnets — speakers, phones, laptops and magnetic clasps can magnetise the movement and make it run fast.
- Avoid knocks. Take the watch off for sport or heavy work.
- A vintage movement that keeps time to within about a minute or two a day is running well. Small variation is normal and part of their charm.
Storage & service
When you are not wearing it, store the watch flat in its box, away from heat and moisture. There is no need to keep it fully wound at all times. To keep it healthy, have it professionally serviced every 3–5 years — a clean and fresh lubrication is what lets these watches run, quite literally, for generations.
Look after it and your Soviet Time piece will outlast its battery-powered cousins many times over. If anything ever feels wrong, write to support@soviet-time.com. You can also review our Returns & guarantee. — Igor, your watchmaker
Customer reviews
No reviews yet — be the first to review Soviet Watch Pobeda 2603 16 Jewels Leningrad Electric Clocks (ECHL) Made in USSR 1950s.












